HP Carb Kits & Parts

A generic image
Carbs, Manifolds and Carb Kits
Displaying 1 to 30 (of 38 Products)
(image for) Complete HP Carb and Air Filter Kit

Complete HP Carb and Air Filter Kit

everything you need to install a high performance carb on your 23cc to 29cc engine. Includes: Walbro WT-668 carb air filter kit linkage gaskets...

$79.99
Add:
(image for) Gasket, Carb HP

Gasket, Carb HP

Gasket that goes between the carb and the intake manifold on teh following engines: G23LH with HP carb G2D G230RC - G290RS

$1.99
Add:
(image for) GSR40 HP Carb Kit with JuiceBox

GSR40 HP Carb Kit with JuiceBox

Walboro GSR40 carb kit with Juice Box Fits GSR40 and GSR40TSi larger throat than stock carb Better adjustability over stock carb, high and low speed...

$199.99
Add:
(image for) HP Carb 10mm

HP Carb 10mm

Generic replacement for Walbro WYK-194-1 high performance barrel carburetor. 10.5mm venturi. Two independent adjustable jets (high and low). High jet...

$39.99
Add:
(image for) HP Carb 15mm

HP Carb 15mm

This is the HP carburetor used in our BladeZ/Tanaka and G43L/GSR40 HP carb kits. Fits 49cc Pocketbikes and 47cc pocketbikes with ADA Racing billet...

$59.99
Add:
(image for) HP Carb and Filter Kit - 49cc 50cc and 52cc

HP Carb and Filter Kit - 49cc 50cc and 52cc

The 49 HP Performance Carburetor and Air filter kit will add more take off power and top speed. Kit includes: 16mm Performance Carburetor (with High...

$79.99
... more info
(image for) HP Carb Kit Tall Manifold

HP Carb Kit Tall Manifold

Increase acceleration and gain 1-2mph top speed 3.7mm larger throat than stock carb Better adjustability over stock carb, high and low speed fuel...

$79.99
Add:
(image for) HP Carb Kit with WT-668

HP Carb Kit with WT-668

Walbro WT-668 carb with manifold and lainkage, as shown. Comes standard on Chung Yang RC engines. 30.5mm center to center bolt pattern. The 668 carb...

$74.99
Add:
(image for) HP Carb, WT-668

HP Carb, WT-668

HP Carb Walbro WT-668 high-performance butterfly carburetor with integrated choke. 2 jets (independent high and low), 15.88mm bore, 12.7mm venturi....

$49.99 $43.99Save: 12% off
Add:
(image for) HP Carb, WT-668

HP Carb, WT-668

HP Carb Walbro WT-668 high-performance butterfly carburetor with integrated choke. 2 jets (independent high and low), 15.88mm bore, 12.7mm venturi....

$49.99 $43.99Save: 12% off
Add:
(image for) HP Carb, WT-813

HP Carb, WT-813

HP Carb Walbro WT-813 HP carburetor for RC engines. Features a 5/8" bore and 1/2" venturi as well as a built in accelerator pump for quicker...

$49.88
Add:
(image for) HP Intake Manifold - G23 to G290

HP Intake Manifold - G23 to G290

Intake Manifold - RC Engines DESCRIPTION: Billet aluminum intake manifold for RC engines. 3-axis machined for a perfect match to the cylinder and...

$39.99
... more info

Max: 3
(image for) HP Intake Manifold - GTR CY42 CY46 in **COLORS**

HP Intake Manifold - GTR CY42 CY46 in **COLORS**

Billet aluminum intake manifold kit for the CY42, CY46, GP420RS, and GP460RS engines. Replaces the stock plastic one that can easily break. Includes...

$39.99
... more info

Max: 3
(image for) HP Tall Intake Manifold - G23 to G290

HP Tall Intake Manifold - G23 to G290

Tall billet aluminum intake manifold for RC engines. 3-axis machined for a perfect match to the cylinder and the carb. The stock manifold does not...

$39.99 $33.88Save: 15% off
Add:

Max: 3
(image for) Intake Kit - GSR40

Intake Kit - GSR40

Billet aluminum intake manifold kit for the Go-Ped GSR40 and Zenoah G43L-D engine. Kit includes billet aluminum manifold, plastic heat spacer,...

$33.88
Add:
(image for) Carb Rebuild kit for 15mm HP Carb

Carb Rebuild kit for 15mm HP Carb

Complete Carb Rebuild kit for 15mm WYK HP Carburetors fits Carbs included in the G43L and GSR40 HP carb kits. Also Fits 49cc Pocketbikes and BladeZ...

$14.88
Add:
(image for) Carb Rebuild kit for HP Carb

Carb Rebuild kit for HP Carb

Complete Carb Rebuild kit for HP Carbs

$14.88
Add:
(image for) Carb Rebuild kit for WT-603 and WT-688 Carberutors

Carb Rebuild kit for WT-603 and WT-688 Carberutors

Complete Carb Rebuild kit for Walbro WT carbs. WT-603 WT-668 WT-499

$18.88
Add:
(image for) HP Carb 603 Kit

HP Carb 603 Kit

HP Carb Kit Fits SuperBigfoot, SuperX-Ped, SuperGo-Quad, & all G23ORC equipped Scooters Walboro WT-603 carb kit Includes carb, swivel kit, cable...

$88.88
Add:
(image for) HP Carb and Maniflod Kit 603

HP Carb and Maniflod Kit 603

Walbro WT-603 carb kit with manifold This complete kits includes the carb, intake manifold, swivel kit, throttle cable bracket, intake gasket, carb...

$99.99
Add:
(image for) HP Intake Manifold in COOL colors - Billet Aluminum

HP Intake Manifold in COOL colors - Billet Aluminum

Tall billet aluminum intake manifold for RC engines. 3-axis machined for a perfect match to the cylinder and the carb. The stock manifold does not...

$33.88
... more info
(image for) GSR40 Juice Box

GSR40 Juice Box

Juice box adds low end and mid range power gpbb-gsr

$69.99 $58.88Save: 16% off
Add:
(image for) Juice Box - Big Bore RC Engine

Juice Box - Big Bore RC Engine

Juice Box - Big Bore RC Engine Billet aluminum boost box. Improves throttle response, quicker acceleration, and overall performance. Can increase top...

$59.99 $48.88Save: 19% off
Add:
(image for) Juice box 230RC

Juice box 230RC

Billet aluminum boost box. Improves throttle response, quicker acceleration, and overall performance. Can increase top speed by as much as 2mph....

$59.99 $48.88Save: 19% off
Add:
(image for) Gasket, Intake manifold 43cc 49cc

Gasket, Intake manifold 43cc 49cc

Gasket that goes between the intake manifold and engine on the following engines: Huasheng 43cc Huasheng 49cc most Chinese 43cc thru 52cc

$1.99
Add:
(image for) Spacer, Carb HP

Spacer, Carb HP

Spacer used to reduce heat from transferring to the carb. Also adds low end. Goes between the carb and the intake manifold on the following engines:...

$3.99
Add:
(image for) Carb Diaphragm ***HALF PRICE***

Carb Diaphragm ***HALF PRICE***

Carb Primer Diaphragm fits all Goped Standard and HP carbs and primer body sits on top of it. Many times you can revive an older carb with just this...

$8.88 $4.99Save: 44% off
Add:
(image for) HP Carb Linkage Kit

HP Carb Linkage Kit

Kit includes everything you need to hook your throttle cable up a new motor

$8.88
Add:
(image for) HP Carb Spring, Throttle Return

HP Carb Spring, Throttle Return

Throttle Return Spring for stock and HP Carbs. Just add it to the ned of the cable and it helps make fast, responsive throttle action

$1.88 $1.44Save: 23% off
Add:
(image for) HP Carb Swivel

HP Carb Swivel

Swivel for stock and HP Carbs. Just add it to the carb where the cable attaches.

$4.88
Add:
Displaying 1 to 30 (of 38 Products)

Featured Products - PARTS to GO FAST

(image for) Complete HP Carb and Air Filter Kit
Complete HP Carb and Air Filter Kit
$79.99

Monthly Specials For December - PARTS to GO FAST

(image for) Primer Plate Body
Primer Plate Body
$11.88 $8.99Save: 24% off
(image for) Primer Bulb Button for Carb
Primer Bulb Button for Carb
$6.99 $4.99Save: 29% off
(image for) HP Tall Intake Manifold - G23 to G290
HP Tall Intake Manifold - G23 to G290
$39.99 $33.88Save: 15% off
(image for) Carb Diaphragm ***HALF PRICE***
Carb Diaphragm ***HALF PRICE***
$8.88 $4.99Save: 44% off
(image for) HP Carb Spring, Throttle Return
HP Carb Spring, Throttle Return
$1.88 $1.44Save: 23% off
(image for) GSR40 Juice Box
GSR40 Juice Box
$69.99 $58.88Save: 16% off
(image for) Juice Box - Big Bore RC Engine
Juice Box - Big Bore RC Engine
$59.99 $48.88Save: 19% off
(image for) Fuel filter - Billet Anodized Colors
Fuel filter - Billet Anodized Colors
$12.99 $7.99Save: 38% off
(image for) HP Carb, WT-668
HP Carb, WT-668
$49.99 $43.99Save: 12% off